* moving types_pb2.py to common/events
* move event manager setup back to core, remove ref to global EVENT_MANAGER and clean up event manager functions
* move invocation_id from events to first class common concept
* move lowercase utils to common
* move lowercase utils to common
* ref CAPTURE_STREAM through method
* add changie
* Move the semver package to common and alter references.
* Alter leftover references to dbt.semver, this time using from syntax.
---------
Co-authored-by: Mila Page <versusfacit@users.noreply.github.com>
In [dbt-labs/dbt-core#7984](https://github.com/dbt-labs/dbt-core/pull/7984)
we began setting a metrics `type_params.input_measures` during metric
processing post parsing. However in that PR we didn't clean up the comment
in the parser about setting `input_measures`. This is that post fact
cleanup.
* Add test asserting GraphRunnableTasks attempt to cancel connections on SystemExit
* Add test asserting GraphRunnableTasks attempt to cancel connections on KeyboardInterrupt
* Add test asserting GraphRunnableNode doesn't try to cancel connections on generic Exception
* tarball lockfile fix
* Add changie doc for tarball deps issue
* Add integration test for ensuring tarball package specification works
This test was written _after_ the fix was commited. However, I ran this
test against main without the fix and it failed. After running the test
with the tarball fix, it passed.
* Remove unnecessary `tarball` conditional logic in `PackageConfig.validate`
We had a conditional to skip validation for a package if the package
included the `tarball` key. However, this conditional always returned
false as it was nested inside a conditional that the package had the
default `package` key, which means it's not a tarball package, but a
package package (maybe we need better differentiation here). If we need
additional validation for tarballs down the road, we should do that one
level up. At this time we have no additional validaitons to add.
* Fix typos in changie doc for tarball deps issue
* Improve tarball package test naming and add related unhappy path test
* Remove unnecessary `setUp` fixture from tarball package tests
We initially included this fixture due to copy and pasting another
test. However, this `setUp` fixture isn't actually necessary for the
tarball dependency tests.
---------
Co-authored-by: Chenyu Li <chenyu.li@dbtlabs.com>
* Add test asserting `SavedQuery` configs can be set from `dbt_project.yml`
* Allow extraneous properties in Export configs
This brings the Export config object more in line with how other config
objects are specified in the unparsed definition. It allows for specifying
of extra configs, although they won't get propagate to the final config.
* Add `ExportConfig` options to `SavedQueryConfig` options
This allows for specifying `ExportConfig` options at the `SavedQueryConfig` level.
This also therefore allows these options to be specified in the dbt_project.yml
config. The plan in the follow up commit is to merge the `SavedQueryConfig` options
into all configs of `Exports` belonging to the saved query.
There are a couple caveots to call out:
1. We've used `schema` instead of `schema_name` on the `SavedQueryConfig` despite
it being called `schema_name` on the `ExportConfig`. This is because need `schema_name`
to be the name of the property on the `ExportConfig`, but `schema` is the user facing
specification.
2. We didn't add the `ExportConfig` `alias` property to the `SavedQueryConfig` This
is because `alias` will always be specific to a single export, and thus it doesn't
make sense to allow defining it on the `SavedQueryConfig` to then apply to all
`Exports` belonging to the `SavedQuery`
* Begin inheriting configs from saved query config, and transitively from project config
Export configs will now inherit from saved query configs, with a preference
for export config specifications. That is to say an export config will inherity
a config attr from the saved query config only if a value hasn't been supplied
on the export config directly. Additionally because the saved query config has
a similar relationship with the project config, exports configs can inherit
from the project config (again with a preference for export config specifications).
* Correct conditional in export config building for map schema to schema_name
I somehow wrote a really weird, but also valid, conditional statement. Previously
the conditional was
```
if combined.get("schema") is not combined.get("schema_name") is None:
```
which basically checked whether `schema` was a boolean that didn't match
the boolean of whether `schema_name` was None. This would pretty much
always evaluate to True because `schema` should be a string or none, not
a bool, and thus would never match the right hand side. Crazy. It has now
been fixed to do the thing we want to it to do. If `schema` isn't `None`,
and `schema_name` is `None`, then set `schema_name` to have the value of
`schema`.
* Update parameter names in `_get_export_config` to be more verbose
* Supports non half width alphanumeric for generic test
* Unify conditional statements
* add CHANGELOG entries
* added test for Japanese
* Move the fix further upstream
* Remove the changes in core/dbt/task/runnable.py
* Fix accidental removal of `_` substitution character
---------
Co-authored-by: Doug Beatty <doug.beatty@dbtlabs.com>
* Handle unknown `type_code` for model contracts
* Changelog entry
* Fix changelog entry
* Functional test for a `type_code` that is not recognized by psycopg2
* Functional tests for data type mismatches
* Move events to common
* More Type Annotations (#8536)
* Extend use of type annotations in the events module.
* Add return type of None to more __init__ definitions.
* Still more type annotations adding -> None to __init__
* Tweak per review
* Allow adapters to include python package logging in dbt logs (#8643)
* add set_package_log_level functionality
* set package handler
* set package handler
* add logging about stting up logging
* test event log handler
* add event log handler
* add event log level
* rename package and add unit tests
* revert logfile config change
* cleanup and add code comments
* add changie
* swap function for dict
* add additional unit tests
* fix unit test
* update README and protos
* fix formatting
* update precommit
---------
Co-authored-by: Peter Webb <peter.webb@dbtlabs.com>
* add test
* fix test
* first pass with constraint error
* add back column checks for temp tables
* changelog
* Update .changes/unreleased/Fixes-20231024-145504.yaml
* changie doc for DSI 0.3.0 upgrade
* Gracefully handle v10 metric filters
* Fix iteration over metrics in `upgrade_v10_metric_filters`
* Update previous manifest version test fixtures to have more expressive metrics
* Regenerate the test v10 manifest artifact using the more expressive metrics from 904cc1ef
To do this I cherry-picked 904cc1ef onto my local 1.6.latest branch,
had the test regenerate the test v10 manifest artifact, and then over
wrote the test v10 manifest artifact on this branch (cherry-picking it
across the branches didn't work, had to copy paste :grimmace:)
* Regenerate test v11 manifest artifact using the fixture changes in 904cc1ef
* Update `upgrade_v10_metric_filters` to handled disabled metrics
Regenerating the v10 and v11 test manifest artifacts uncovered an
issue wherein we weren't handling disabled metrics that need to
get upgraded. This commit fixes that. Additionally, the
`upgrade_v10_metric_filters` was getting a bit unwieldy, so I broke
extracted the abstracted sub functions.
* Fix `test_backwards_compatible_versions` test
When we regenerated the v10 test manifest artifact, it started having
the `metricflow_time_sine` model, and it didn't previously. This caused
`test_backwards_compatible_versions` to start failing because it was
no longer identified as having modified state for v10. The test has
been altered accordingly
* Bump to dbt-semantic-interfaces 0.3.0b1
* Update import path of `WhereFilterParser` from `dbt-semantic-interfaces`
In 0.3.x of `dbt-semantic-intefaces` the location of the WhereFilterParser
moved to be grouped in with a bunch of new adjacent code. As such,
we needed to correct our import path of it.
* Create basic `SavedQuery` node type based on `SavedQuery` protocol from DSI
* Add ability to add SavedQueries to the manifest
* Define unparsed SavedQuery node
* Begin parsing saved_query objects to manifest
* Skip jinja rendering of `SavedQuery.where` property
* Begin propagating `SavedQueries` on the manifest to the semantic manifest
* Add tests for basic saved query parsing
* Add custom pluralization handling of SavedQuery node type
* Add a config subclass to SavedQuery node
* Move the SavedQuery node to nodes.py
Unfortunately things are a bit too intertwined currently for SavedQuery
to be in it's own file. We need to add the SavedQuery node to the
GraphMemberNode, unfortunately with SavedQuery in it's own file,
importing it would have caused a circular dependency. We'll need
to separately come in and split things up as a cleanup portion of
work.
* Add basic plumbing of saved query configs to projects
* Add basic lookup utility for saved queries, SavedQueryLookup
* Handle disabled SavedQuery nodes in parsing and lookups
* Add SavedQuery nodes to grouping process
Our grouping logic seems to be in a weird spot. It seems liek we're
moving to setting the `group` for a node in the node's `config` however,
all of the logic around grouping is still focused on the top level `group`
property on a nodes. To get group stuff plumbed I've thus added `group`
as a top level property of the `SavedQuery` node, and populated it from
the config group value.
* Plumb through saved query in a lot more places
I don't like making scatter shot commits like this. However, a lot
of this commit was written ~4am, soooo yea. Things were broken, I wanted
things to be unbroken. I mostly searched for `semantic_models` and added
the equivalent necessary `saved_queries`. Some stuff is in support of
writing out the manifest, some stuff helps with node selection, it's a
lot of miscelaneous stuff that I don't fully understand.
* Add `depends_on` to `SavedQuery` nodes and populate from `metrics` property
* Add partial parsing support to SavedQuery nodes
* Add `docs` support for SavedQuery descriptions
* Support selctor methods for SavedQuery nodes
* Add `refs` property to SavedQuery node
We don't actually append anything to `refs` for SavedQuery nodes currently.
I'm not sure if anything needs to be appended to them. Regardless, we
access the `refs` property throughout the codebase while iterating over
nodes. It seems wise to support this attribute as to not accidently blow
something up with it not existing.
* Support `saved_queries` when upgrading from manifests <= v10 (and regenerate v11)
* Add changie doc for saved query node support
* Pin to dbt-semantic-interfaces 0.3.0b1 for saved query work
We're gonna release DSI 0.3.0, and if this PR automatically pulls that
in things will break. But the things that need fixing should be handled
separately from this PR. After releasing DSI 0.3.0 I'm going to create
a branch off/ontop of this one, and open a stacked PR with the associated
changes.
* Bump supported DSI version to 0.3.x
* Switch metric filters and saved query where to use ne WhereFilterIntersection
* Update schema yaml readers to create WhereFilterInterfaces
* Expand metric filters and saved query where property to handle both str and list of strs
* Update tests which were broken by where filter changes
* Regeneate v11 manifest
* Fixup: Update `SavedQueryLookup.perform_lookup` to operate on saved queries
I missed this when I was copy and pasting 🤦
* Add support for getting freshness from DBMS metadata
* Add changelog entry
* Add simple test case
* Change parsing error to warning and add new event type for warning
* Code review simplification of capability dict.
* Revisions to the capability mechanism per review
* Move utility function.
* Reduce try/except scope
* Clean up imports.
* Simplify typing per review
* Unit test fix
* add `store_failures_as` parameter to TestConfig, catch strategy parameter in test materialization
* create test results as views
* updated test expected values for new config option
* break up tests into reusable tests and adapter specific configuration, update test to check for relation type and confirm views update
* move test configuration into base test class
* allow `store_failures_as` to drive whether failures are stored
* update expected test config dicts to include the new default value for store_failures_as
* Add `store_failures_as` config for generic tests
* cover --store-failures on CLI gap
* add generic tests test case for store_failures_as
* update object names for generic test case tests for store_failures_as
* remove unique generic test, it was not testing `store_failures_as`
* pull generic run and assertion into base test class to turn tests into quasi-parameterized tests
* add ephemeral option for store_failures_as, as a way to easily turn off store_failures at the model level
* add compilation error for invalid setting of store_failures_as
---------
Co-authored-by: Doug Beatty <doug.beatty@dbtlabs.com>
* Explanation of Parsing vs. Compilation vs. Runtime
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Update core/dbt/parser/parsing-vs-compilation-vs-runtime.md
* Apply suggestions from code review
Co-authored-by: Jeremy Cohen <jeremy@dbtlabs.com>
* Fix a couple markdown rendering issues
* Move to the "explain it like im 64" folder
When ELI5 just isnt detailed enough.
* Disambiguate Python references
Disambiguate Python references and delineate SQL models ("Jinja-SQL") from Python models ("dbt-py")
---------
Co-authored-by: Jeremy Cohen <jeremy@dbtlabs.com>
* Add semantic model test to `test_contracts_graph_parsed.py`
The tests in `test_contracts_graph_parsed.py` are meant to ensure
that we can go from objects to dictionaries and back without any
changes. We've had a desire to simplify these tests. Most tests in
this file have three to four fixtures, this test only has one. What
a test of this format ensures is that parsing a SemanticModel from
a dictionary doesn't add/drop any keys from the dictionary and that
when going back to the dictionary no keys are dropped. This style of
test will still break whenever the semantic model (or sub objects)
change. However now when that happens, only one fixture will have to
be updated (whereas previously we had to update 3-4 fixtures).
* Begin using hypothesis package for symmetry testing
Hypothesis is a python package for doing property testing. The `@given`
parameterizes a test, with it generating the arguements it has following
`strategies`. The main strategies we use is `builds` this takes in a callable
passes any sub strategies for named arguements, and will try to infer any
other arguments if the callable is typed. I found that even though the
test was run many many times, some of the `SemanticModel` properties
weren't being changed. For instance `dimensions`, `entities`, and `measures`
were always empty lists. Because of this I defined sub strategies for
some attributes of `SemanticModel`s.
* Update unittest readme to have details on test_contracts_graph_parsed methodology
* Include option to generate static index.html
* Added changie
* Using DBT's system load / write file methods for better cross platform
support
* Updated docs tests with dbt.client.systems calls for file reading
* Writing out static_index.html as binary file to prevent line-ending
conversions on Windows. (similar behaviour as index.html)
* Add performance metrics to the CommandCompleted event.
* Add changelog entry.
* Add flag for controling the log level of ResourceReport.
* Update changelog entry to reflect changes
* Remove outdated attributes
* Work around missing resource module on windows
* Fix corner case where flags are not set
* Add new get_catalog_relations macro, allowing dbt to specify which relations in a schema the adapter should return data about
* Implement postgres adapter support for relation filtering on catalog queries
* Code review changes adding feature flag for catalog-by-relation-list support
* Use profile specified in --profile with dbt init (#7450)
* Use profile specified in --profile with dbt init
* Update .changes/unreleased/Fixes-20230424-161642.yaml
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
* Refactor run() method into functions, replace exit() calls with exceptions
* Update help text for profile option
---------
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
* add TestLargeEphemeralCompilation (#8376)
* Fix a couple of issues in the postgres implementation of get_catalog_relations
* Add relation count limit at which to fall back to batch retrieval
* Better feature detection mechanism for adapters.
* Code review changes to get_catalog_relations and adapter feature checking
* Add changelog entry
---------
Co-authored-by: ezraerb <ezraerb@alum.mit.edu>
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
Co-authored-by: Michelle Ark <MichelleArk@users.noreply.github.com>
* Add `date_spine` macro (and macros it depends on) from dbt-utils to core
The macros added are
- date_spine
- get_intervals_between
- generate_series
- get_powers_of_two
We're adding these to core because they are becoming more prevalently used
with the increase usage in the semantic layer. Basically if you are
using the semantic layer currently, then it is almost a requirement
to use dbt-utils, which is undesireable given the SL is supported directly
in core. The primary focus of this was to just add `date_spine`. However,
because `date_spine` depends on other macros, these other macros were
also moved.
* Add adapter tests for `get_powers_of_two` macro
* Add adapter tests for `generate_series` macro
* Add adapter tests for `get_intervals_between` macro
* Add adapter tests for `date_spine` macro
* Improve test fixture for `date_spine` macro to work with multiple adapters
* Cast to types to date in fixture_date_spine when targeting redshift
* Improve test fixture for `get_intervals_between` macro to work with multiple adapters
* changie doc for adding date_spine macro
* Include 'join_to_timespine` and `fill_nulls_with` in metric fixture
* Support `join_to_timespine` and `fill_nulls_with` properties on measure inputs to metrics
* Assert new `fill_nulls_with` and `join_to_timespine` properties don't break associated DSI protocol
* Add doc for metric null coalescing improvements
* Fix unit test for unparsed metric objects
The `assert_symmetric` function asserts that dictionaries are mostly
equivalent. I say mostly equivalent because it drops keys that are
`None`. The issue is that that `join_to_timespine` gets defaulted
to `False`, so we have to specify it in the `get_ok_dict` so that
they match.
* allow multioption to be quoted
* changelog
* fix test
* remove list format
* fix tests
* fix list object
* review arg change
* fix quotes
* Update .changes/unreleased/Features-20230918-150855.yaml
* add types
* convert list to set in test
* make mypy happy
* mroe mypy happiness
* more mypy happiness
* last mypy change
* add node to test
* Extend use of type annotations in the events module.
* Add return type of None to more __init__ definitions.
* Still more type annotations adding -> None to __init__
* Tweak per review
* Use profile specified in --profile with dbt init
* Update .changes/unreleased/Fixes-20230424-161642.yaml
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
* Refactor run() method into functions, replace exit() calls with exceptions
* Update help text for profile option
---------
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
* move config changes into alter.sql in alignment with other adapters
* move shared relations macros to relations root
* move single models files to models root
* add table to replace
* move create file into relation directory
* implement replace for postgres
* move column specific macros into column directory
* add unit test for can_be_replaced
* update renameable_relations and replaceable_relations to frozensets to set defaults
* fixed tests for new defaults
* Add docstrings to `contracts/graph/metrics.py` functions to document what they do
Used [dbt-labs/dbt-core#5607](https://github.com/dbt-labs/dbt-core/pull/5607)
for context on what the functions should do.
* Add typing to `reverse_dag_parsing` and update function to work on 1.6+ metrics
* Add typing to `parent_metrics` and `parent_metrics_names`
* Add typing to `base_metric_dependency` and `derived_metric_dependency` and update functions to work on 1.6+ metrics
* Simplify implementations of `basic_metric_dependency` and `derived_metric_dependnecy`
* Add typing to `ResolvedMetricReference` initialization
* Add typing to `derived_metric_dependency_graph`
* Simplify conditional controls in `ResolvedMetricReference` functions
The functions in `ResolvedMetricReference` use `manifest.metric.get(...)`
which will only return either a `Metric` or `None`, never a different
node type. Thus we don't need to check that the returned metric is
a metric.
* Don't recurse on over `depends_on` for non-derived metrics in `reverse_dag_parsing`
The function `reverse_dag_parsing` only cares about derived metrics,
that is metrics that depend on other metrics. Metrics only depend on
other metrics if they are one of the `DERIVED_METRICS` types. Thus
doing a recursive call to `reverse_dag_parsing` for non `DERIVED_METRICS`
types is unnecessary. Previously we were iterating over a metric's
`depends_on` property regardless of whether the metric was a `DERIVED_METRICS`
type. Now we only do this work if the metric is of a `DERIVED_METRICS`
type.
* Simplify `parent_metrics_names` by having it call `parent_metrics`
* Unskip `TestMetricHelperFunctions.test_derived_metric` and update fixture setup
* Add changie doc for metric helper function updates
* Get manifest in `test_derived_metric` from the parse dbt_run invocation
* Remove `Relation` a intiatlization attribute for `ResolvedMetricReference`
* Add return typing to class `__` functions of `ResolvedMetricReference`
* Move from `manifest.metrics.get` to `manifest.expect` in metric helpers
Previously with `manifest.metrics.get` we were just skipping when `None`
was returned. Getting `None` back was expected in that `parent_unique_id`s
that didn't belong to metrics should return `None` when calling
`manifest.metrics.get`, and these are fine to skip. However, there's
an edgecase where a `parent_unique_id` is supposed to be a metric, but
isn't found, thus returning `None`. How likely this edge case could
get hit, I'm not sure, but it's a possible edge case. Using `manifest.metrics.get`
it we can't actually tell if we're in the edge case or not. By moving
to `manifest.expect` we get the error handling built in, and the only
trade off is that we need to change our conditional to skip returned
nodes that aren't metrics.
* update `Number` class to handle integer values (#8306)
* add show test for json data
* oh changie my changie
* revert unecessary cahnge to fixture
* keep decimal class for precision methods, but return __int__ value
* jerco updates
* update integer type
* update other tests
* Update .changes/unreleased/Fixes-20230803-093502.yaml
---------
Co-authored-by: Emily Rockman <emily.rockman@dbtlabs.com>
* account for integer vs number on table merges
* add tests for combining number with integer.
* add unit test when nulls are added
* cant none as an Integer
* fix null tests
---------
Co-authored-by: dave-connors-3 <73915542+dave-connors-3@users.noreply.github.com>
Co-authored-by: Dave Connors <dave.connors@fishtownanalytics.com>
* first draft of adding in table - materialized view swap
* table/view/materialized view can all replace each other
* update renameable relations to a config
* migrate relations macros from `macros/adapters/relations` to `macros/relations` so that generics are close to the relation specific macros that they reference; also aligns with adapter macro files structure, to look more familiar
* move drop macro to drop macro file
* align the behavior of get_drop_sql and drop_relation, adopt existing default from drop_relation
* add explicit ddl for drop statements instead of inheriting the default from dbt-core
* update replace macro dependent macros to align with naming standards
* update type for mashumaro, update related test
* Improve typing of `ContextMember` functions
* Improve typing of `Var` functions
* Improve typing of `ContextMeta.__new__`
* Improve typing `BaseContext` and functions
In addition to just adding parameter typing and return typing to
`BaseContext` functions. We also declared `_context_members_` and
`_context_attrs_` as properites of `BaseContext` this was necessary
because they're being accessed in the classes functions. However,
because they were being indirectly instantiated by the metaclass
`ContextMeta`, the properties weren't actually known to exist. By
adding declaring the properties on the `BaseContext`, we let mypy
know they exist.
* Remove bare `invocations` of `@contextmember` and `@contextproperty`, and add typing to them
Previously `contextmember` and `contextproperty` were 2-in-1 decorators.
This meant they could be invoked either as `@contextmember` or
`@contextmember('some_string')`. This was fine until we wanted to return
typing to the functions. In the instance where the bare decorator was used
(i.e. no `(...)` were present) an object was expected to be returned. However
in the instance where parameters were passed on the invocation, a callable
was expected to be returned. Putting a union of both in the return type
made the invocations complain about each others' return type. To get around this
we've dropped the bare invocation as acceptable. The parenthesis are now always
required, but passing a string in them is optional.
* WIP
* WIP
* get group and enabled added
* changelog
* cleanup
* getting measure lookup working
* missed file
* get project level working
* fix last test
* add groups to config tests
* more group tests
* fix path
* clean up manifest.py
* update error message
* fix test assert
* remove extra check
* resolve conflicts in manaifest
* update manifest
* resolve conflict
* add alias
* Add compiled node properties to run_results.json
* Include compiled-node attributes in run_results.json
* Fix typo
* Bump schema version of run_results
* Fix test assertions
* Update expected run_results to reflect new attributes
* Code review changes
* Fix mypy warnings for ManifestLoader.load() (#8443)
* revert python version for docker images (#8445)
* revert python version for docker images
* add comment to not update python version, update changelog
* Bumping version to 1.7.0b1 and generate changelog
* [CT-3013] Fix parsing of `window_groupings` (#8454)
* Update semantic model parsing tests to check measure non_additive_dimension spec
* Make `window_groupings` default to empty list if not specified on `non_additive_dimension`
* Add changie doc for `window_groupings` parsing fix
* update `Number` class to handle integer values (#8306)
* add show test for json data
* oh changie my changie
* revert unecessary cahnge to fixture
* keep decimal class for precision methods, but return __int__ value
* jerco updates
* update integer type
* update other tests
* Update .changes/unreleased/Fixes-20230803-093502.yaml
---------
Co-authored-by: Emily Rockman <emily.rockman@dbtlabs.com>
* Improve docker image README (#8212)
* Improve docker image README
- Fix unnecessary/missing newline escapes
- Remove double whitespace between parameters
- 2-space indent for extra lines in image build commands
* Add changelog entry for #8212
* ADAP-814: Refactor prep for MV updates (#8459)
* apply reformatting changes only for #8449
* add logging back to get_create_materialized_view_as_sql
* changie
* swap trigger (#8463)
* update the implementation template (#8466)
* update the implementation template
* add colon
* Split tests into classes (#8474)
* add flaky decorator
* split up tests into classes
* revert update agate for int (#8478)
* updated typing and methods to meet mypy standards (#8485)
* Convert error to conditional warning for unversioned contracted model, fix msg format (#8451)
* first pass, tests need updates
* update proto defn
* fixing tests
* more test fixes
* finish fixing test file
* reformat the message
* formatting messages
* changelog
* add event to unit test
* feedback on message structure
* WIP
* fix up event to take in all fields
* fix test
* Fix ambiguous reference error for duplicate model names across packages with tests (#8488)
* Safely remove external nodes from manifest (#8495)
* [CT-2840] Improved semantic layer protocol satisfaction tests (#8456)
* Test `SemanticModel` satisfies protocol when none of it's `Optionals` are specified
* Add tests ensuring SourceFileMetadata and FileSlice satisfiy DSI protocols
* Add test asserting Defaults obj satisfies protocol
* Add test asserting SemanticModel with optionals specified satisfies protocol
* Split dimension protocol satisfaction tests into with and without optionals
* Simplify DSI Protocol import strategy in protocol satisfaction tests
* Add test asserting DimensionValidtyParams satisfies protocol
* Add test asserting DimensionTypeParams satisfies protocol
* Split entity protocol satisfaction tests into with and without optionals
* Split measure protocol satisfication tests and add measure aggregation params satisficaition test
* Split metric protocol satisfaction test into optional specified an unspecified
Additionally, create where_filter pytest fixture
* Improve protocol satisfaction tests for MetricTypeParams and sub protocols
Specifically we added/improved protocol satisfaction tests for
- MetricTypeParams
- MetricInput
- MetricInputMeasure
- MetricTimeWindow
* Convert to using mashumaro jsonschema with acceptable performance (#8437)
* Regenerate run_results schema after merging in changes from main.
---------
Co-authored-by: Gerda Shank <gerda@dbtlabs.com>
Co-authored-by: Matthew McKnight <91097623+McKnight-42@users.noreply.github.com>
Co-authored-by: Github Build Bot <buildbot@fishtownanalytics.com>
Co-authored-by: Quigley Malcolm <QMalcolm@users.noreply.github.com>
Co-authored-by: dave-connors-3 <73915542+dave-connors-3@users.noreply.github.com>
Co-authored-by: Emily Rockman <emily.rockman@dbtlabs.com>
Co-authored-by: Jaime Martínez Rincón <jaime@jamezrin.name>
Co-authored-by: Mike Alfare <13974384+mikealfare@users.noreply.github.com>
Co-authored-by: Michelle Ark <MichelleArk@users.noreply.github.com>
* Test `SemanticModel` satisfies protocol when none of it's `Optionals` are specified
* Add tests ensuring SourceFileMetadata and FileSlice satisfiy DSI protocols
* Add test asserting Defaults obj satisfies protocol
* Add test asserting SemanticModel with optionals specified satisfies protocol
* Split dimension protocol satisfaction tests into with and without optionals
* Simplify DSI Protocol import strategy in protocol satisfaction tests
* Add test asserting DimensionValidtyParams satisfies protocol
* Add test asserting DimensionTypeParams satisfies protocol
* Split entity protocol satisfaction tests into with and without optionals
* Split measure protocol satisfication tests and add measure aggregation params satisficaition test
* Split metric protocol satisfaction test into optional specified an unspecified
Additionally, create where_filter pytest fixture
* Improve protocol satisfaction tests for MetricTypeParams and sub protocols
Specifically we added/improved protocol satisfaction tests for
- MetricTypeParams
- MetricInput
- MetricInputMeasure
- MetricTimeWindow
* first pass, tests need updates
* update proto defn
* fixing tests
* more test fixes
* finish fixing test file
* reformat the message
* formatting messages
* changelog
* add event to unit test
* feedback on message structure
* WIP
* fix up event to take in all fields
* fix test
* add show test for json data
* oh changie my changie
* revert unecessary cahnge to fixture
* keep decimal class for precision methods, but return __int__ value
* jerco updates
* update integer type
* update other tests
* Update .changes/unreleased/Fixes-20230803-093502.yaml
---------
Co-authored-by: Emily Rockman <emily.rockman@dbtlabs.com>
* Update semantic model parsing tests to check measure non_additive_dimension spec
* Make `window_groupings` default to empty list if not specified on `non_additive_dimension`
* Add changie doc for `window_groupings` parsing fix
* first pass
* WIP
* update issue body
* fix triggering label
* fix docs
* add better run name
* reduce complexity
* update description
* fix PR title
* point at workflow on main
* fix wording
* add label
* Update semantic model parsing test to check `create_metric = true` functionality
* Add `create_metric` boolean property to unparsed measure objects
* Begin creating metrics from measures with `create_metric = True`
* Add test ensuring partial parsing handles metrics generated from measures
* Ensure partial parsing appropriately deletes metrics generated from semantic models
* Add changie doc for addition
* Separate generated metrics from parsed metrics for partial parsing
I was doing a demo earlier today of this branch (minus this commit)
and noticed something odd. When I changes a semantic model, metrics
that should have been technically uneffected would get dropped. Basically
if I made a change to a semantic model which had metrics in the same
file, and then ran parse, those metrics defined in the same file
would get dropped. Then with no other changes, if I ran parse again
they would come back. What was happening was that parsed metrics
and generated metrics were getting tracked the same way on the file
objects for partial parsing. In 0787a7c7b6
we began dropping all metrics tracked in a file objects when changes
to semantic models were detected. Since parsed metrics and generated
metrics were being tracked together on the file object, the parsed
metrics were getting dropped as well. In this commit we begin separating
out the tracking of generated metrics and parsed metrics on the
file object, and now only drop the generated metrics when semantic
models have a detected change.
* Assert in test that semantic model partial parsing doesn't clobber regular metrics
* Replaced the FirstRunResultError and AfterFirstRunResultError events with RunResultError.
* Attempts at reasonable unit tests.
* Restore event manager after unit test.
* Support configurable delimiter for seed files, default to comma (#3990)
* Update Features-20230317-144957.yaml
* Moved "delimiter" to seed config instead of node config
* Update core/dbt/clients/agate_helper.py
Co-authored-by: Cor <jczuurmond@protonmail.com>
* Update test_contracts_graph_parsed.py
* fixed integration tests
* Added functional tests for seed files with a unique delimiter
* Added docstrings
* Added a test for an empty string configured delimiter value
* whitespace
* ran black
* updated changie entry
* Update Features-20230317-144957.yaml
---------
Co-authored-by: Cor <jczuurmond@protonmail.com>
* add param to control maxBytes for single dbt.log file
* nits
* nits
* Update core/dbt/cli/params.py
Co-authored-by: Peter Webb <peter.webb@dbtlabs.com>
---------
Co-authored-by: Peter Webb <peter.webb@dbtlabs.com>
* Add test ensuring `warn_error_options` is dictified in `invocation_args_dict` of contexts
* Add dictification specific to `warn_error_options` in `args_to_dict`
* Changie doc for serialization changes of warn_error_options
* Add test asserting that a macro with the work materializtion doesn't cause issues
* Let macro names include the word `materialization`
Previously we were checking if a macro included a materialization
based on if the macro name included the word `materialization`. However,
a macro name included the word `materialization` isn't guarnteed to
actually have a materialization, and a macro that doesn't have
`materialization` in the name isn't guaranteed to not have a materialization.
This change is to detect macros with materializations based on the
detected block type of the macro.
* Add changie doc materialization in macro detection
* Add test for checking that `_connection_exception_retry` handles `EOFError`s
* Update `_connection_exception_retry` to handle `EOFError` exceptions
* Add changie docs for `_connection_exception_retry` handling `EOFError` exceptions
* applied new integration tests to existing framework
* applied new integration tests to existing framework
* generalized tests for reusability in adapters; fixed drop index issue
* generalized tests for reusability in adapters; fixed drop index issue
* removed unnecessary overrides in tests
* adjusted import to allow for usage in adapters
* adjusted import to allow for usage in adapters
* removed fixture artifact
* generalized the materialized view fixture which will need to be specific to the adapter
* unskipped tests in the test runner package
* corrected test condition
* corrected test condition
* added missing initial build for the relation type swap tests
* add env vars for datadog ci visibility
* modify pytest command for tracing
* fix posargs
* move env vars to job that needs them
* add test repeater to DD
* swap flags
* Bump version support for `dbt-semantic-interfaces` to `~=0.1.0rc1`
* Add tests for asserting WhereFilter satisfies protocol
* Add `call_parameter_sets` to `WhereFilter` class to satisfy protocol
* Changie doc for moving to DSI 0.1.0rc1
* [CT-2822] Fix `NonAdditiveDimension` Implementation (#8089)
* Add test to ensure `NonAdditiveDimension` implementation satisfies protocol
* Fix typo in `NonAdditiveDimension`: `window_grouples` -> `window_groupings`
* Add changie doc for typo fix in NonAdditiveDimension
* Add metrics from metric type params to a metric's depends_on
* Add Lookup utility for finding `SemanticModel`s by measure names
* Add the `SemanticModel` of a `Metric`'s measure property to the `Metric`'s `depends_on`
* Add `SemanticModelConfig` to `SemanticModel`
Some tests were failing due to `Metric`'s referencing `SemanticModels`.
Specifically there was a check to see if a referenced node was disabled,
and because `SemanticModel`'s didn't have a `config` holding the `enabled`
boolean attr, core would blow up.
* Checkpoint on test fixing
* Correct metricflow_time_spine_sql in test fixtures
* Add check for `SemanticModel` nodes in `Linker.link_node`
Now that `Metrics` depend on `SemanticModels` and `SemanticModels`
have their own dependencies on `Models` they need to be checked for
in the `Linker.link_node`. I forget the details but things blow up
without it. Basically it adds the SemanticModels to the dependency
graph.
* Fix artifacts/test_previous_version_state.py tests
* fix access/test_access.py tests
* Fix function metric tests
* Fix functional partial_parsing tests
* Add time dimension to semantic model in exposures fixture
* Bump DSI version to a minimum of 0.1.0dev10
DSI 0.1.0dev10 fixes an incoherence issue in DSI around `agg_time_dimension`
setting. This incoherence was that `measure.agg_time_dimension` was being
required, even though it was no longer supposed to be a required attribute
(it's specificially typed as optional in the protocol). This was causing
a handful of tests to fail because the `semantic_model.defaults.agg_time_dimension`
value wasn't being respected. Pulling in the fix from DSI 0.1.0dev10 fixes
the issue.
Interestingly after bumping the DSI version, the integration tests were
still failing. If I ran the tests individually they passed though. To get
`make integration` to run properly I ended up having to clear my `.tox`
cache, as it seems some outdated state was being persisted.
* Add test specifically for checking the `depends_on` of `Metric` nodes
* Re-enable test asserting calling metric nodes in models
* Migrate `checked_agg_time_dimension` to `checked_agg_time_dimension_for_measure`
DSI 0.1.0dev10 moved `checked_agg_time_dimension` from the `Measure`
protocol to the `SemanticModel` protocol as `checked_agg_time_dimension_for_measure`.
This finishes a change where for a given measure either the `Measure.agg_time_dimension`
or the measure's parent `SemanticModel.defaults.agg_time_dimension` needs to be
set, instead of always require the measure's `Measure.agg_time_dimension`.
* Add changie doc for populating metric
---------
Co-authored-by: Gerda Shank <gerda@dbtlabs.com>
The original implementation of validate_sql was called dry_run,
but in the rename the test classes and much of their associated
documentation still retained the old naming.
This is mainly cosmetic, but since these test classes will be
imported into adapter repositories we should fix this now before
the wrong name proliferates.
* Add dry_run method to base adapter with implementation for SQLAdapters
resolves#7839
In the CLI integration, MetricFlow will issue dry run queries as
part of its warehouse-level validation of the semantic manifest,
including all semantic model and metric definitions.
In most cases, issuing an `explain` query is adequate, however,
BigQuery does not support the `explain` keyword and so we cannot
simply pre-pend `explain` to our input queries and expect the
correct behavior across all contexts.
This commit adds a dry_run() method to the BaseAdapter which mirrors
the execute() method in that it simply delegates to the ConnectionManager.
It also adds a working implementation to the SQLConnectionManager and
includes a few test cases for adapter maintainers to try out on their own.
The current implementation should work out of the box with most
of our adapters. BigQuery will require us to implement the dry_run
method on the BigQueryConnectionManager, and community-maintained
adapters can opt in by enabling the test and ensuring their own
implementations work as expected.
Note - we decided to make these concrete methods that throw runtime
exceptions for direct descendants of BaseAdapter in order to avoid
forcing community adapter maintainers to implement a method that does
not currently have any use cases in dbt proper.
* Switch dry_run implementation to be macro-based
The common pattern for engine-specific SQL statement construction
in dbt is to provide a default macro which can then be overridden
on a per-adapter basis by either adapter maintainers or end users.
The advantage of this is users can take advantage of alternative
SQL syntax for performance or other reasons, or even to enable
local usage if an engine relies on a non-standard expression and
the adapter maintainer has not updated the package.
Although there are some risks here they are minimal, and the benefit
of added expressiveness and consistency with other similar constructs
is clear, so we adopt this approach here.
* Improve error message for InvalidConnectionError in test_invalid_dry_run.
* Rename dry_run to validate_sql
The validate_sql name has less chance of colliding with dbt's
command nomenclature, both now and in some future where we have
dry-run operations.
* Rename macro and test files to validate_sql
* Fix changelog entry
* add permissions
* replace db setup
* try with bash instead of just pytest flags
* fix test command
* remove spaces
* remove force-flaky flag
* add starting vlaues
* add mac and windows postgres isntall
* define use bash
* fix typo
* update output report
* tweak last if condition
* clarify failures/successful runs
* print running success and failure tally
* just output pytest instead of capturing it
* set shell to not exit immediately on exit code
* add formatting around results for easier scanning
* more output formatting
* add matrix to unlock parallel runners
* increase to ten batches
* update debug
* add comment
* clean up comments
* Remove `create_metric` as a public facing `SemanticModel.Measure` property
We want to add `create_metric`. The `create_metric` property will be
incredibly useful. However, at this time it is not hooked up, and we don't
have time to hook it up before the code freeze for 1.6.0rc of core. As
it doesn't do anything, we shouldn't allow people to specify it, because
it won't do what one would expect. We plan on making the implementation
of `create_metric` a priority for 1.7 of core
* Changie doc for the removal of create_metric property
* add negative test case
* changie
* missed a comma
* Update changelog entry
* Add a negative number (rather than subtract a positive number)
---------
Co-authored-by: Doug Beatty <44704949+dbeatty10@users.noreply.github.com>
Co-authored-by: Doug Beatty <doug.beatty@dbtlabs.com>
* Fix accidental propagation of log messages to root logger.
* Add changelog entry
* Fixed an issue which blocked debug logging to stdout with --log-level debug, unless --debug was also used.
* Use dbt-semantic-interface validations on semantic models and metrics defined in Core.
* Remove empty test, since semantic models don't generate any validation warnings.
* Add changelog entry.
* Temporarily remove requirement that there must be semantic models definied in order to define metrics
* add interface changes section to the PR template
* update entire template
* split up choices for tests and interfaces
* minor formatting change
* add line breaks
* actually put in line breaks
* revert split choices in checklist
* add line breaks to top
* move docs link
* typo
* ct-2551: adds old and unmodified state selection methods
* ct-2551: update check_unmodified_content to simplify
* add unit and integration tests for unmodified and old
* add changelog entry
* ct-2551: reformatting of contingent adapter assignment list
* UnifiedToUTC
* Check proximity of dbt_valid_to and deleted time
* update the message to print if the assertion fails
* add CHANGELOG entries
* test only if naive
* Added comments about naive and aware
* Generalize comparison of datetimes that are "close enough"
---------
Co-authored-by: Doug Beatty <doug.beatty@dbtlabs.com>
* Fix tests fixtures which were using measures for metric numerator/denominators
In our previous upgrade to DSI dev7, numerators and denominators for
metrics switched from being `MetricInputMeasure`s to `MetricInput`s.
I.e. metric numerators and denominators should references other metrics,
not semantic model measures. However, at that time, we weren't actually
doing anything with numerators and denominators in core, so no issue
got raised. The changes we are about to make though are going to surface
these issues..
* Add tests for ensuring a metric's `input_measures` gets properly populated
* Begin populating `metric.type_params.input_measures`
This isn't my favorite bit of code. Mostly because there are checks for
existence which really should be handled before this point, however a
good point for that to happen doesn't exist currently. For instance,
in an ideal world by the time we get to `_process_metric_node`, if a
metric is of type `RATIO` and the nominator and denominator should be
guaranteed.
* Update test checking that disabled metrics aren't added to the manifest metrics
We updated from the metric `number_of_people` to `average_tenure_minus_people` for
this test because disabling `number_of_people` raised other exceptions at parse
time due to a metric referencing a disabled metric. The metric `average_tenure_minus_people`
is a leaf metric, and so for this test, it is a better candidate.
* Update `test_disabled_metric_ref_model` to have more disabled metrics
There are metrics which depend on the metric `number_of_people`. If
`number_of_people` is disabled without the metrics that depend on it
being disabled, then a different (expected) exception would be raised
than the one this test is testing for. Thus we've disabled those
downstream metrics.
* Add test which checks that metrics depending on disabled metrics raise an exception
* Add changie doc for populating metric input measures
* Add merge incremental strategy
* Expect merge to be a valid strategy for Postgres
---------
Co-authored-by: Anders Swanson <anders.swanson@dbtlabs.com>
Co-authored-by: Doug Beatty <doug.beatty@dbtlabs.com>
* CT-2711: Add remove_tests() call to delete_schema_source() so that call sites are more uniform with other node deletion call sites. This will enable further code factorization.
* CT-2711: Factor repeated code section (mostly) out of PartialParsing.handle_schema_file_changes()
* CT-2711: Factor a repeated code section out of schedule_nodes_for_parsing()
* Update semantic model parsing test to check measure agg params
* Make `use_discrete_percentile` and `use_approximate_percentile` non optional and default false
This was a mistake in our implementation of the MeasureAggregationParams.
We had defined them as optional and defaulting to `None`. However, as the
protocol states, they cannot be `None`, they must be a boolean value.
Thus now we now ensure them.
* Add changie doc for measure percentile fixes
* Update semantic model parsing test to check different measure expr types
* Allow semantic model measure exprs to be defined with ints and bools in yaml
Sometimes the expr for a measure can defined in yaml with a bool or an int.
However, we were only allowing for strings. There was a work around for this,
which was wrapping your bool or int in double quotes in the yaml, but
this can be fairly annoying for the end user.
* Changie doc for fixing measure expr yaml specification
* CT-2651: Add Semantic Models to the manifest and various pieces of graph linking code
* CT-2651: Finish integrating semantic models into the partial parsing system
* CT-2651: More semantic model details for partial parsing
* CT-2651: Remove merged references to project_dependencies
* CT-2651: Revise changelog entry
* CT-2651: Disable unit test until partial parsing of semantic models is complete.
* CT-2651: Temporarily disable an apparently-flaky test.
* Add some comments to methods constructing Project/RuntimeConfig
* Save flag that packages dict came from dependencies.yml
* Test for not rendering packages_dict
* Changie
* Ensure packages_yml_dict and dependencies_yml_dict are dictionaries
* Ensure "packages" passed to render_packages is a dict
* Bump DSI dependency version to 0.1.0dev7
* Cleaner DSI type enum importing
Previoulsy we had to use individual import paths for each type enum
that dbt-semantic-interfaces provided. However, dbt-semantic-interfaces
has been updated to allow for importing all the type enums from a
singular path.
* Cleaner DSI protocol importing
Previoulsy we had to use individual import paths for each protocol
that dbt-semantic-interfaces provided. However, dbt-semantic-interfaces
has been updated to allow for importing all the protocols from a
singular path.
* Add semantic protocol satisifcation test for metric type params
* Replace `metric.type_params.measures` with `metric.type_params.input_measures`
In DSI 0.1.0dev7 `measures` on metric type params became `input_measures`.
Additionally `input_measures` should not be user specified but something
we compile at parse time, thus we've removed it from `UnparsedMetricTypeParams`.
Finally, actually populating `input_measures` is somewhat complicated due
to the existance of derived metrics, thus that work is being pushed
off to CT-2707.
* Update metric numerator/denominator to be `MetricInput`s
In DSI 0.1.0dev7 `metric.type_params.numerator` and `metric.type_params.denominator`
switched from being `MetricInputMeasure`s to `MetricInput`s. This
commit reflects that change. Additionally, some helper functions on
metric type params were removed related to the numerator and denominator.
Thus we've removed them respectively in this commit.
* Add protocol satisfaction tests for `MetricInput` and `MetricInputMeasure`
* Add `post_aggregation_reference` to `MetricInput` and fix typo in `MetricInputMeasure`
DSI 0.1.0dev7 added `post_aggregation_reference` to the `MetricInput` protocol,
thus we've added it to our implementation in core. Additionally, we had a typo
in a method name in our implementation of `MetricInputMeasure`, ironically
a similar function to the one we've added for `MetricInput`
* Changie doc for upgraded to DSI 0.1.0dev7
* Fix parsing of metric numerator and denominator in schema_yaml_readers
Previously numerator and denominator of a metric were `MetricInputMeasure`s,
now they're `MetricInput`s. Changing the typing isn't enough though.
We have parsing functions in `schema_yaml_readers` which were specifically
parsing the numerator and denominator as if they were `MetricInputMeasure`s.
Thus we had to updating the schema_yaml_readers to parse them as `MetricInput`s.
During this we had some logic in a parsing function `_get_metric_inputs` which
could be abstracted to newly added functions.
* Upgrade to dbt-semantic-interfaces v0.1.0dev5
This is a fairly simple upgrade. Literally it's just pointing at the
the new versions. The v3 schemas are directly compatible with v5 because
there were no protocol level changes from v3 to v5. All the changers were
updates to tools MetricFlow uses from DSI, not tools that we ourselves
are using in core (yet).
* Add changie doc for DSI version bump
* Update metric filters in testing fixtures
I incorrectly wrote the tests such that they didn't include curly
braces, `{{..}}`, around things like `dimension(..)` for filters.
This updates the tests fixtures to have proper filter specifications
* Skip jinja rendering of `filter` key of metrics
Note that `filter` can show up in multiple places: as a root key
on a metric (`metric.filter`), on a metric input (`metric.type_params.metrics[x].filter`),
denominator (`metric.type_params.denominator.filter`), numerator
(`metric.type_params.numerator.filter`), and a metric input measure
(`metric.type_params.measure.filter` and `metric.type_params.measures[x].filter`).
In this commit we skip all of them :)
* Add changie doc for skipping jinja parsing for metric filters
* Update yaml renderer test for metrics
* Add AdapterRegistered event log message
* Add AdapterRegistered to unit test
* make versioning and logging consistent
* make versioning and logging consistent
* add to_version_string
* remove extra equals
* format fire_event
* Add tests to ensure our semantic layer nodes satisfy the DSI protocols
These tests create runtime checkable versions of the protocols defined in
DSI. Thus we can instantiate instances of our semantic layer nodes and
use `isinstance` to check that they satisfy the protocol. These `runtime_checkable`
versions of the protocols should only exist in testing and should never
be used in the actual package code.
* Update the `Dimension` object of `SemanticModel` node to match DSI protocol
* Make `UnparsedDimension` more strict and update schema readers accordingly
* Update the `Entity` object of `SemanticModel` node to match DSI protocol
* Make `UnparsedEntity` more strict and update schema readers accordingly
* Update the `Measure` object of `SemanticModel` node to match DSI protocol
* Make `UnparsedMeasure` more strict and update schema readers accordingly
* Update the `SemanticModel` node to match DSI protocol
A lot of the additions are helper functions which we don't actually
use in core. This is a known issue. We're in the process of removing
a fair number of them from the DSI protocol spec. However, in the meantime
we need to implement them to satisfy the protocol unfortunately.
* Make `UnparsedSemanticModel` more strict and update schema readers accordingly
* Changie entry for updating SemanticModel node
* Use contextvar to store and get project_root for path selector method
* Changie
* Modify test to check Path selector with project-dir
* Don't set cv_project_root in base task if no config
* Refactor MetricNode definition to satisfy DSI Metric protocol
* Fix tests involving metrics to have updated properties
* Update UnparsedMetricNode to match new metric yaml spec
* Update MetricParser for new unparsed and parsed MetricNodes
* Remove `rename_metric_attr`
We're intentionally breaking the spec. There will be a separate tool provided
for migrating from dbt-metrics to dbt x metricflow. This bit of code was renaming
things like `type` to `calculation_method`. This is problematic because `type` is
on the new spec, while `calculation_method` is not. Additionally, since we're
intentionally breaking the spec, this function, `rename_metric_attr`, shouldn't be
used for any property renaming.
* Fix tests for Metrics (1.6) changes
* Regenerated v10 manifest schema and associated functional test artifact state
* Remove no longer needed tests
* Skip / comment out tests for metrics functionality that we'll be implementing later
* Begin outputting semantic manifest artifact on every run
* Drop metrics during upgrade_manifest_json if manifest is v9 or before
* Update properties of `minimal_parsed_metric_dict` to match new metric spec
* Add changie entry for metric node breaking changes
* Add semantic model nodes to semantic manifest
* Add dbt-semantic-interfaces as a dependency
With the integration with MetricFlow we're taking a dependency on
`dbt-semantic-interfaces` which acts as the source of truth for
protocols which MetricFlow and dbt-core need to agree on. Additionally
we're hard pinning to 0.1.0.dev3 for now. We plan on having a less
restrictive specification when dbt-core 1.6 hits GA.
* Add implementations of DSI Metadata protocol to nodes.py
* CT-2521: Initial work on adding new SemanticModel node
* CT-2521: Second rough draft of SemanticModels
* CT-2521: Update schema v10
* CT-2521: Update unit tests for new SemanticModel collection in manifest
* CT-2521: Add changelog entry
* CT-2521: Final touches on initial implementation of SemanticModel parsing
* Change name of Metadata class to reduce potential for confusion
* Remove "Replaceable" inheritance, per review
* CT-2521: Rename internal variables from semantic_models to semantic_nodes
* CT-2521: Update manifest schema to reflect change
---------
Co-authored-by: Quigley Malcolm <quigley.malcolm@dbtlabs.com>
* changie
* ADAP-387: Stub materialized view as a materialization (#7211)
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* remove unneeded return statement, rename directory
* remove unneeded ()
* responding to some pr feedback
* adjusting order of events for mv base work
* move up prexisting drop of backup
* change relatiion type to view to be consistent
* add base test case
* fix jinja exeception message expression, basic test passing
* response to feedback, removeal of refresh infavor of combined create_as, etc.
* swapping to api layer and stratgeies for default implementation (basing off postgres, redshift)
* remove stratgey to limit need for now
* remove unneeded story level changelog entry
* add strategies to condtional in place of old macros
* macro name fix
* rename refresh macro in api level
* align names between postgres and default to same convention
* align names between postgres and default to same convention
* change a create call to full refresh
* pull adapter rename into strategy, add backup_relation as optional arg
* minor typo fix, add intermediate relation to refresh strategy and initial attempt at further conditional logic
* updating to feature main
---------
Co-authored-by: Matthew McKnight <matthew.mcknight@dbtlabs.com>
* ADAP-387: reverting db_api implementation (#7322)
* changie
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* remove unneeded return statement, rename directory
* remove unneeded ()
* responding to some pr feedback
* adjusting order of events for mv base work
* move up prexisting drop of backup
* change relatiion type to view to be consistent
* add base test case
* fix jinja exeception message expression, basic test passing
* response to feedback, removeal of refresh infavor of combined create_as, etc.
* swapping to api layer and stratgeies for default implementation (basing off postgres, redshift)
* remove stratgey to limit need for now
* remove unneeded story level changelog entry
* add strategies to condtional in place of old macros
* macro name fix
* rename refresh macro in api level
* align names between postgres and default to same convention
* change a create call to full refresh
* pull adapter rename into strategy, add backup_relation as optional arg
* minor typo fix, add intermediate relation to refresh strategy and initial attempt at further conditional logic
* updating to feature main
* removing db_api and strategies directories in favor of matching current materialization setups
* macro name change
* revert to current approach for materializations
* added tests
* added `is_materialized_view` to `BaseRelation`
* updated materialized view stored value to snake case
* typo
* moved materialized view tests into adapter test framework
* add enum to relation for comparison in jinja
---------
Co-authored-by: Mike Alfare <mike.alfare@dbtlabs.com>
* ADAP-391: Add configuration change option (#7272)
* changie
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* move up pre-existing drop of backup
* change relation type to view to be consistent
* add base test case
* fix jinja exception message expression, basic test passing
* align names between postgres and default to same convention
* init set of Enum for config
* work on initial Enum class for on_configuration_change base it off ConstraintTypes which is also a str based Enum in core
* add on_configuration_change to unit test expected values
* make suggested name change to Enum class
* add on_configuration_change to some integration tests
* add on_configuration_change to expected_manifest to pass functional tests
* added `is_materialized_view` to `BaseRelation`
* updated materialized view stored value to snake case
* moved materialized view tests into adapter test framework
* add alter materialized view macro
* change class name, and config setup
* play with field setup for on_configuration_change
* add method for default selection in enum class
* renamed get_refresh_data_in_materialized_view_sql to align with experimental package
* changed expected values to default string
* added in `on_configuration_change` setting
* change ignore to skip
* updated default option for on_configuration_change on NodeConfig
* removed explicit calls to enum values
* add test setup for testing fail config option
* updated `config_updates` to `configuration_changes` to align with `on_configuration_change` name
* setup configuration change framework
* skipped tests that are expected to fail without adapter implementation
* cleaned up log checks
---------
Co-authored-by: Mike Alfare <mike.alfare@dbtlabs.com>
* ADAP-388: Stub materialized view as a materialization - postgres (#7244)
* move the body of the default macros into the postgres implementation, throw errors if the default is used, indicating that materialized views have not been implemented for that adapter
---------
Co-authored-by: Matthew McKnight <matthew.mcknight@dbtlabs.com>
* ADAP-402: Add configuration change option - postgres (#7334)
* changie
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* remove unneeded return statement, rename directory
* remove unneeded ()
* responding to some pr feedback
* adjusting order of events for mv base work
* move up prexisting drop of backup
* change relatiion type to view to be consistent
* add base test case
* fix jinja exeception message expression, basic test passing
* added materialized view stubs and test
* response to feedback, removeal of refresh infavor of combined create_as, etc.
* updated postgres to use the new macros structure
* swapping to api layer and stratgeies for default implementation (basing off postgres, redshift)
* remove stratgey to limit need for now
* remove unneeded story level changelog entry
* add strategies to condtional in place of old macros
* macro name fix
* rename refresh macro in api level
* align names between postgres and default to same convention
* change a create call to full refresh
* pull adapter rename into strategy, add backup_relation as optional arg
* minor typo fix, add intermediate relation to refresh strategy and initial attempt at further conditional logic
* init copy of pr 387 to begin 391 implementation
* init set of Enum for config
* work on initial Enum class for on_configuration_change base it off ConstraintTypes which is also a str based Enum in core
* remove postgres-specific materialization in favor of core default materialization
* update db_api to use native types (e.g. str) and avoid direct calls to relation or config, which would alter the run order for all db_api dependencies
* add clarifying comment as to why we have a single test that's expected to fail at the dbt-core layer
* add on_configuration_change to unit test expected values
* make suggested name change to Enum class
* add on_configuration_change to some integretion tests
* add on_configuration_change to expected_manifest to pass functuional tests
* removing db_api and strategies directories in favor of matching current materialization setups
* macro name change
* revert to current approach for materializations
* revert to current approach for materializations
* added tests
* move materialized view logic into the `/materializations` directory in line with `dbt-core`
* moved default macros in `dbt-core` into `dbt-postgres`
* added `is_materialized_view` to `BaseRelation`
* updated materialized view stored value to snake case
* moved materialized view tests into adapter test framework
* updated materialized view tests to use adapter test framework
* add alter materialized view macro
* add alter materialized view macro
* change class name, and config setup
* change class name, and config setup
* play with field setup for on_configuration_change
* add method for default selection in enum class
* renamed get_refresh_data_in_materialized_view_sql to align with experimental package
* changed expected values to default string
* added in `on_configuration_change` setting
* change ignore to skip
* added in `on_configuration_change` setting
* updated default option for on_configuration_change on NodeConfig
* updated default option for on_configuration_change on NodeConfig
* fixed list being passed as string bug
* removed explicit calls to enum values
* removed unneeded test class
* fixed on_configuration_change to be picked up appropriately
* add test setup for testing fail config option
* remove breakpoint, uncomment tests
* update skip scenario to use empty strings
* update skip scenario to avoid using sql at all, remove extra whitespace in some templates
* push up initial addition of indexes for mv macro
* push slight change up
* reverting alt macro and moving the do create_index call to be more in line with other materializations
* Merge branch 'feature/materialized-views/ADAP-2' into feature/materialized-views/ADAP-402
# Conflicts:
# core/dbt/contracts/graph/model_config.py
# core/dbt/include/global_project/macros/materializations/models/materialized_view/alter_materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/create_materialized_view_as.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/get_materialized_view_configuration_changes.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/refresh_materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/replace_materialized_view.sql
# plugins/postgres/dbt/include/postgres/macros/materializations/materialized_view.sql
# tests/adapter/dbt/tests/adapter/materialized_views/base.py
# tests/functional/materializations/test_materialized_view.py
* merge feature branch into story branch
* merge feature branch into story branch
* added indexes into the workflow
* fix error in jinja that caused print error
* working on test messaging and skipping tests that might not fit quite into current system
* add drop and show macros for indexes
* add drop and show macros for indexes
* add logic to determine the indexes to create or drop
* pulled index updates through the workflow properly
* convert configuration changes to fixtures, implement index changes into tests
* created Model dataclass for readability, added column to swap index columns for testing
* fixed typo
---------
Co-authored-by: Matthew McKnight <matthew.mcknight@dbtlabs.com>
* ADAP-395: Implement native materialized view DDL (#7336)
* changie
* changie
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* init attempt at mv and basic forms of helper macros by mixing view and experimental mv sources
* remove unneeded return statement, rename directory
* remove unneeded ()
* responding to some pr feedback
* adjusting order of events for mv base work
* move up prexisting drop of backup
* change relatiion type to view to be consistent
* add base test case
* fix jinja exeception message expression, basic test passing
* added materialized view stubs and test
* response to feedback, removeal of refresh infavor of combined create_as, etc.
* updated postgres to use the new macros structure
* swapping to api layer and stratgeies for default implementation (basing off postgres, redshift)
* remove stratgey to limit need for now
* remove unneeded story level changelog entry
* add strategies to condtional in place of old macros
* macro name fix
* rename refresh macro in api level
* align names between postgres and default to same convention
* align names between postgres and default to same convention
* change a create call to full refresh
* pull adapter rename into strategy, add backup_relation as optional arg
* minor typo fix, add intermediate relation to refresh strategy and initial attempt at further conditional logic
* init copy of pr 387 to begin 391 implementation
* updating to feature main
* updating to feature main
* init set of Enum for config
* work on initial Enum class for on_configuration_change base it off ConstraintTypes which is also a str based Enum in core
* remove postgres-specific materialization in favor of core default materialization
* update db_api to use native types (e.g. str) and avoid direct calls to relation or config, which would alter the run order for all db_api dependencies
* add clarifying comment as to why we have a single test that's expected to fail at the dbt-core layer
* add on_configuration_change to unit test expected values
* make suggested name change to Enum class
* add on_configuration_change to some integretion tests
* add on_configuration_change to expected_manifest to pass functuional tests
* removing db_api and strategies directories in favor of matching current materialization setups
* macro name change
* revert to current approach for materializations
* revert to current approach for materializations
* added tests
* move materialized view logic into the `/materializations` directory in line with `dbt-core`
* moved default macros in `dbt-core` into `dbt-postgres`
* added `is_materialized_view` to `BaseRelation`
* updated materialized view stored value to snake case
* typo
* moved materialized view tests into adapter test framework
* updated materialized view tests to use adapter test framework
* add alter materialized view macro
* add alter materialized view macro
* added basic sql to default macros, added postgres-specific sql for alter scenario, stubbed a test case for index update
* change class name, and config setup
* change class name, and config setup
* play with field setup for on_configuration_change
* add method for default selection in enum class
* renamed get_refresh_data_in_materialized_view_sql to align with experimental package
* changed expected values to default string
* added in `on_configuration_change` setting
* change ignore to skip
* added in `on_configuration_change` setting
* updated default option for on_configuration_change on NodeConfig
* updated default option for on_configuration_change on NodeConfig
* fixed list being passed as string bug
* fixed list being passed as string bug
* removed explicit calls to enum values
* removed explicit calls to enum values
* removed unneeded test class
* fixed on_configuration_change to be picked up appropriately
* add test setup for testing fail config option
* remove breakpoint, uncomment tests
* update skip scenario to use empty strings
* update skip scenario to avoid using sql at all, remove extra whitespace in some templates
* push up initial addition of indexes for mv macro
* push slight change up
* reverting alt macro and moving the do create_index call to be more in line with other materializations
* Merge branch 'feature/materialized-views/ADAP-2' into feature/materialized-views/ADAP-402
# Conflicts:
# core/dbt/contracts/graph/model_config.py
# core/dbt/include/global_project/macros/materializations/models/materialized_view/alter_materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/create_materialized_view_as.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/get_materialized_view_configuration_changes.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/refresh_materialized_view.sql
# core/dbt/include/global_project/macros/materializations/models/materialized_view/replace_materialized_view.sql
# plugins/postgres/dbt/include/postgres/macros/materializations/materialized_view.sql
# tests/adapter/dbt/tests/adapter/materialized_views/base.py
# tests/functional/materializations/test_materialized_view.py
* merge feature branch into story branch
* merge feature branch into story branch
* added indexes into the workflow
* fix error in jinja that caused print error
* working on test messaging and skipping tests that might not fit quite into current system
* Merge branch 'feature/materialized-views/ADAP-2' into feature/materialized-views/ADAP-395
# Conflicts:
# core/dbt/include/global_project/macros/materializations/models/materialized_view/get_materialized_view_configuration_changes.sql
# plugins/postgres/dbt/include/postgres/macros/adapters.sql
# plugins/postgres/dbt/include/postgres/macros/materializations/materialized_view.sql
# tests/adapter/dbt/tests/adapter/materialized_views/test_on_configuration_change.py
# tests/functional/materializations/test_materialized_view.py
* moved postgres implemention into plugin directory
* update index methods to align with the configuration update macro
* added native ddl to postgres macros
* removed extra docstring
* updated references to View, now references MaterializedView
* decomposed materialization into macros
* refactor index create statement parser, add exceptions for unexpected formats
* swapped conditional to check for positive state
* removed skipped test now that materialized view is being used
* return the results and logs of the run so that additional checks can be applied at the adapter level, add check for refresh to a test
* add check for indexes in particular for apply on configuration scenario
* removed extra argument
* add materialized views to get_relations / list_relations
* typos in index change logic
* moved full refresh check inside the build sql step
---------
Co-authored-by: Matthew McKnight <matthew.mcknight@dbtlabs.com>
* removing returns from tests to stop logs from printing
* moved test cases into postgres tests, left non-test functionality in base as new methods or fixtures
* fixed overwrite issue, simplified assertion method
* updated import order to standard
* fixed test import paths
* updated naming convention for proper test collection with the test runner
* still trying to make the test runner happy
* rewrite index updates to use a better source in Postgres
* break out a large test suite as a separate run
* update `skip` and `fail` scenarios with more descriptive results
* typo
* removed call to skip status
* reverting `exceptions_jinja.py`
* added FailFastError back, the right way
* removed PostgresIndex in favor of the already existing PostgresIndexConfig, pulled it into its own file to avoid circular imports
* removed assumed models in method calls, removed odd insert records and replaced with get row count
* fixed index issue, removed some indirection in testing
* made test more readable
* remove the "apply" from the tests and put it on the base as the default
* generalized assertion for reuse with dbt-snowflake, fixed bug in record count utility
* fixed type to be more generic to accommodate adapters with their own relation types
* fixed all the broken index stuff
* updated on_configuration_change to use existing patterns
* updated on_configuration_change to use existing patterns
* reflected update in tests and materialization logic
* reflected update in tests and materialization logic
* reverted the change to create a config object from the option object, using just the option object now
* reverted the change to create a config object from the option object, using just the option object now
* modelled database objects to support monitoring all configuration changes
* updated "skip" to "continue", throw an error on non-implemented macro defaults
* updated "skip" to "continue", throw an error on non-implemented macro defaults
* updated "skip" to "continue", throw an error on non-implemented macro defaults
* updated "skip" to "continue", throw an error on non-implemented macro defaults
* reverted centralized framework, retained a few reusable base classes
* updated names to be more consistent
* readability updates
* added readme specifying that `relation_configs` only supports materialized views for now
---------
Co-authored-by: Matthew McKnight <matthew.mcknight@dbtlabs.com>
Co-authored-by: Matthew McKnight <91097623+McKnight-42@users.noreply.github.com>
* --connection-flag
* Standardize the plugin functions used by DebugTask
* Cleanup redundant code and help logic along.
* Add more output tests to add logic coverage and formatting.
* Code review
---------
Co-authored-by: Mila Page <versusfacit@users.noreply.github.com>
* Fix names within functional test
* Changelog entry
* Test for implementation of null-safe equals comparison
* Remove duplicated where filter
* Fix null-safe equals comparison
* Fix tests for `concat` and `hash` by using empty strings () instead of `null`
* Remove macro namespace interpolation
* Include null checks in utils test base
* Add tests for the schema test
* Add tests for this macro
---------
Co-authored-by: Mila Page <versusfacit@users.noreply.github.com>
* Honor `--skip-profile-setup` parameter when inside an existing project
* Use project name as the profile name
* Use separate file connections for reading and writing
* Raise a custom exception when no adapters are installed
* Test skipping interactive profile setup when inside a dbt project
* Replace `assert_not_called()` since it does not work
* Verbose CLI argument for skipping profile setup
* Use separate file connections for reading and writing
* Check empty list in a Pythonic manner
* CT-2461: Work toward model deprecation
* CT-2461: Remove unneeded conversions
* CT-2461: Fix up unit tests for new fields, correct a couple oversights
* CT-2461: Remaining implementation and tests for model/ref deprecation warnings
* CT-2461: Changelog entry for deprecation warnings
* CT-2461: Refine datetime handling and tests
* CT-2461: Fix up unit test data
* CT-2461: Fix some more unit test data.
* CT-2461: Fix merge issues
* CT-2461: Code review items.
* CT-2461: Improve version -> str conversion
* Allow missing `profiles.yml` for `dbt deps` and `dbt init`
* Some commands allow the `--profiles-dir` to not exist
* Remove fix to verify that CI tests work
* Allow missing `profiles.yml` for `dbt deps` and `dbt init`
* CI is not finding any installed adapters
* Remove functional test for `dbt init`
* Adding perf testing GHA
* Fixing tigger syntax
* Fixing PR creation issue
* Updating testing var
* Remove unneeded branch names
* Fixing branch naming convention
* Standardizing branch name to var
* Consolidating PR jobs
* Updating inputs and making more readable
* Splitting steps up
* Making some updates here to simplify and update
* Remove tab
* Cleaned up testing TODOs before committing
* Fixing spacing
* Fixing spacing issue
* Create publication.py, various Publication classes, Dependency class
* Load dependencies.yml and the corresponding publication file
* Add "public_nodes" and populate ref_lookup
* resolve_ref working
* Add public nodes to parent and child maps
* Bump manifest version and fix tests, use ModelDependsOn
* Split out PublicationArtifact and PublicationConfig, store public_models
separately
* Store dependencies in publication artifact
* change detection of PublicModel for >= python3.10
* Handle removing references for re-processing if publication has changed
* Handle only changed publication artifacts
* Add some logging events
* Remove duplicate nodes from manifest
* refactor relation_from_relation_name
* Remove duplicate writing of manifest.json
* Add public_nodes to flat_graph
* Move some file name constants to core/dbt/constants.py
* Remove "environment" from ProjectDependency. Add
database/schema/identifier to PublicModel. Update TargetNotFound
exception.
* Include external publication dependencies in publication artifact dependencies
* Remove create_from_relation_name, call create_from_node instead
* Change PublicationArtifactChanged message to debug level
* Make write_publication_artifact a function in parser/manifest.py
* Create fixture to create minimal alternate project (just models)
* develop multi project test case
* Latest version should use un-suffixed alias
* Latest version can be in un-suffixed file
* FYI when unpinned ref to model with prerelease version
* [WIP] Nicer error if versioned ref to unversioned model
* Revert "Latest version should use un-suffixed alias"
This reverts commit 3616c52c1eed7588b9e210e1c957dfda598be550.
* Revert "[WIP] Nicer error if versioned ref to unversioned model"
This reverts commit c9ae4af1cfbd6b7bfc5dcbb445556233eb4bd2c0.
* Define real event for UnpinnedRefNewVersionAvailable
* Update pp test for implicit unsuffixed defined_in
* Add changelog entry
* Fix unit test
* marky feedback
* Add test case for UnpinnedRefNewVersionAvailable event
- Data type constraints are now native to SQL table materializations. Enforce columns are specific data types and not null depending on database functionality. ([#6079](https://github.com/dbt-labs/dbt-core/issues/6079))
- Have dbt debug spit out structured json logs with flags enabled. ([#5353](https://github.com/dbt-labs/dbt-core/issues/5353))
- add adapter_response to dbt test and freshness result ([#2964](https://github.com/dbt-labs/dbt-core/issues/2964))
- Improve error message for packages missing `dbt_project.yml` ([#6663](https://github.com/dbt-labs/dbt-core/issues/6663))
- Adjust makefile to have clearer instructions for CI env var changes. ([#6689](https://github.com/dbt-labs/dbt-core/issues/6689))
- Stand-alone Python module for PostgresColumn ([#6772](https://github.com/dbt-labs/dbt-core/issues/6772))
- Exposure owner requires one of name or email keys, and accepts additional arbitrary keys ([#6833](https://github.com/dbt-labs/dbt-core/issues/6833))
- dbt snapshot works in click ([#5554](https://github.com/dbt-labs/dbt-core/issues/5554))
- dbt list working with click ([#5549](https://github.com/dbt-labs/dbt-core/issues/5549))
- Add dbt run-operation to click CLI ([#5552](https://github.com/dbt-labs/dbt-core/issues/5552))
- dbt build working with new click framework ([#5541](https://github.com/dbt-labs/dbt-core/issues/5541))
- dbt docs generate works with new click framework ([#5543](https://github.com/dbt-labs/dbt-core/issues/5543))
- Replaced the EmptyLine event with a more general Formatting event, and added a Note event. ([#6481](https://github.com/dbt-labs/dbt-core/issues/6481))
- Small optimization on manifest parsing benefitting large DAGs ([#6697](https://github.com/dbt-labs/dbt-core/issues/6697))
- Revised and simplified various structured logging events ([#6664](https://github.com/dbt-labs/dbt-core/issues/6664), [#6665](https://github.com/dbt-labs/dbt-core/issues/6665), [#6666](https://github.com/dbt-labs/dbt-core/issues/6666))
- dbt init works with click ([#5548](https://github.com/dbt-labs/dbt-core/issues/5548))
- [CT-920][CT-1900] Create Click CLI runner and use it to fix dbt docs commands ([#5544](https://github.com/dbt-labs/dbt-core/issues/5544), [#6722](https://github.com/dbt-labs/dbt-core/issues/6722))
- Migrate debug task to click ([#5546](https://github.com/dbt-labs/dbt-core/issues/5546))
- Optimized GraphQueue to remove graph analysis bottleneck in large dags. ([#6759](https://github.com/dbt-labs/dbt-core/issues/6759))
- Implement --version for click cli ([#6757](https://github.com/dbt-labs/dbt-core/issues/6757))
- [CT-1841] Convert custom target test to Pytest ([#6638](https://github.com/dbt-labs/dbt-core/issues/6638))
- add support for DBT_PROJECT_DIR env var ([#6078](https://github.com/dbt-labs/dbt-core/issues/6078))
- Enable diff based partial parsing ([#6592](https://github.com/dbt-labs/dbt-core/issues/6592))
- Enforce contracts on models materialized as tables and views ([#6751](https://github.com/dbt-labs/dbt-core/issues/6751), [#7034](https://github.com/dbt-labs/dbt-core/issues/7034), [#6756](https://github.com/dbt-labs/dbt-core/issues/6756))
- make version configs optional ([#7054](https://github.com/dbt-labs/dbt-core/issues/7054))
- [CT-1584] New top level commands: interactive compile ([#6358](https://github.com/dbt-labs/dbt-core/issues/6358))
### Fixes
- allow adapters to change model name resolution in py models ([#7114](https://github.com/dbt-labs/dbt-core/issues/7114))
### Docs
- Distiguish node "access" in the DAG with node borders & opacity. ([dbt-docs/#378](https://github.com/dbt-labs/dbt-docs/issues/378))
- Fix JSON path to package overview docs ([dbt-docs/#390](https://github.com/dbt-labs/dbt-docs/issues/390))
- Add selection by group to DAG ([dbt-docs/#380](https://github.com/dbt-labs/dbt-docs/issues/380))
### Under the Hood
- Add deprecation warning for DBT_NO_PRINT ([#6960](https://github.com/dbt-labs/dbt-core/issues/6960))
### Dependencies
- Update pathspec requirement from <0.11,>=0.9 to >=0.9,<0.12in/core([#6737](https://github.com/dbt-labs/dbt-core/pull/6737))
- Allow `--select` and `--exclude` multiple times ([#7158](https://github.com/dbt-labs/dbt-core/issues/7158))
- Specifying "log-path" and "target-path" in "dbt_project.yml" is deprecated. This functionality will be removed in a future version of dbt-core. If you need to specify a custom path for logs or artifacts, please set via CLI flag or env var instead. ([#6882](https://github.com/dbt-labs/dbt-core/issues/6882))
### Features
- Make model contracts agnostic to ordering ([#6975](https://github.com/dbt-labs/dbt-core/issues/6975), [#7064](https://github.com/dbt-labs/dbt-core/issues/7064))
- Unified constraints and check_constraints properties for columns and models ([#7066](https://github.com/dbt-labs/dbt-core/issues/7066))
- Switch from betterproto to google protobuf and enable more flexible meta dictionary in logs ([#6832](https://github.com/dbt-labs/dbt-core/issues/6832))
- Ignore duplicate edges in subgraph to speed up dbt build ([#7191](https://github.com/dbt-labs/dbt-core/issues/7191))
- Support setting of callbacks for programmatic uses of `dbtRunner` ([#6763](https://github.com/dbt-labs/dbt-core/issues/6763))
- Detect breaking changes to contracts in state:modified check ([#6869](https://github.com/dbt-labs/dbt-core/issues/6869))
### Fixes
- add timeout for dbt --version command ([#6992](https://github.com/dbt-labs/dbt-core/issues/6992))
- Add exception handling in postflight decorator to address exit codes ([#7010](https://github.com/dbt-labs/dbt-core/issues/7010))
- Fix partial parsing error due to not requiring "version" ([#7236](https://github.com/dbt-labs/dbt-core/issues/7236))
### Under the Hood
- Treat contract config as a python object ([#6748](https://github.com/dbt-labs/dbt-core/issues/6748), [#7184](https://github.com/dbt-labs/dbt-core/issues/7184))
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
